The AEC continuously synchronizes more than 25 different parameters and communicates directly with the engine control unit. This provides best possible power utilization for your engine while offering maximum protection.
To prevent damage to the engine and its parts, different component protection measures are adapted in the ABT Engine Control unit – individually for each vehicle. In addition, all protective measures of the production control unit are retained without restrictions. The same applies to the diagnostics capability of the production control unit.
- Engine temperature: If the engine is too cold or too hot (coolant and/or oil), only the production power of the engine is released.
- Charge air temperature: If the charge air temperature is too high, the power is also reduced to the production level.
- Height: The power increase is reduced to protect the turbocharger at high altitudes in order to prevent exceeding its maximum rpm.
ABT stands for quality at manufacturer's level: At our state-of-the-art development center in Kempten (Germany), all engines and technologies are put through their paces on a high-end chassis dynamometer by the best engineers. Fine adjustment takes place in real vehicle operation over 3000 to 5000 km. In contrast to most competitors, this is done by changing the sensor values not with a two-dimensional characteristic curve but with a three-dimensional map. The maps for the individual channels are usually set up over the engine speed and the relative engine load.
Software profile: We use our experience from motorsports for the programming and functionalities of the ABT Engine Control.
The high-tech ABT Engine Control unit analyzes all performance-relevant data and translates them directly into ABT POWER commands.
The relative load is calculated from the charge pressure and the ambient pressure in the engine. In addition to this, a compensation is installed for the relative load for journeys at all altitude levels.
The engine speed is captured in real time and can be configured individually for each engine.
Individual application of the maps means that a change in the sensor values only takes place when the engine nears full load. This in turn means that the sensor values are changed only in very few areas of the actual engine load range.
The cable harnesses for the ABT Engine Control are individually tailored and protected against spray water. They can easily be integrated into the vehicle infrastructure, which also includes the vehicle communication networks. Installation is very easy thanks to the defined installation position of the AEC using a stainless steel bracket system and the production central connector.
The ABT Engine Control module is protected against external influences by a GoreTex membrane. This protective skin is breathable and offers permanent protection against moisture inside the AEC. This ensures a particularly long service life of the AEC.
No problems in any environment: The ABT Engine Control has passed all relevant environmental tests, e.g. electromagnetic compatibility (EMC), salt spray test, thermal shock.
The individual and splash-proof cable harnesses enable problem-free integration of the ABT system in the vehicle infrastructure, including the vehicle-internal communication networks. Thanks to the series central plug, installation can be realised quite simply. Here the competing solutions still often require disconnecting and soldering of the cables which is fraught with errors.
ABT offers their own technical component reports from TÜV Rheinland to provide a problem-free registration of the power upgrade. With this ABT customers can be sure to have a car that is comfortable to law.
You have questions relating to our products or you are looking for an individual consultation from our specialist? We will be happy to be of assistance to you!
CERTIFIED BY TÜV!
Products of ABT Sportsline are designed and manufactured according to the strict quality standard ISO 9001. It hardly needs mentioning that they are also TÜV-certified.
You are planning an ABT conversion or need a workshop appointment? We offer a unique service with a perfect timing. Taking care for your perfect satisfaction, we uphold the long-time pleasure you are experiencing with our products.
ABT is the only tuning company that has been using its decades of very successful motorsport experiences to optimise its engines. Its products are extensively tested on both the Kempten development centres’ dynamometer and on public roads.
Find out everything there is to know about “driving pleasure powered by ABT” at our head office in Kempten/Allgäu. Enjoy a fascinating review of over 70 years of racing in the ABT Motorsport Museum, experience the latest ABT cars live and up close, and discover the latest sporty accessories in the ABT Tuning Shop.
We are open for you from Monday to Friday from 8 a.m. to 6 p.m. and on Saturday from 9 a.m. to 1 p.m. in the Johann-Abt-Straße.
The ABT Sportsline development centre is located between the Kaufbeurer and the Johann-Abt-Straße in Kempten. Here our engineers work on the constructions for our brand-new projects. Our spezialists benefit from our years of experience in the motorsport.
We develop vehicle highlights like the ABT RS5-R, the ABT RS6+, the ABT TT RS-R or the ABT Vossen SQ7 at regular intervals.